【GAIDOH】超小型軽量なエンジン粉砕機が出た！！

【GAIDOH】超小型軽量なエンジン粉砕機が出た！！

Yes, hello everyone, the thing we’ve been waiting for in town has arrived. Here it is. It’s a wood chipper. I’ve been wanting one since last time, but I also want to thank you, the viewers, for

Cutting down various trees and disposing of those branches. I’ve been told a lot that it would be better to have a wood chipper, so this is what I wanted the most, but finally, finally, I received this chipper as a project, so I decided to choose

This one. Now that I’ve introduced it to you, I’d like to actually use it a little bit and see what it’s like.This time, I’m talking about a wood chipper that I’ve never heard of before, but it’s made by Gado-san. Now that we are manufacturing our own products , we are selling

A variety of products on Amazon, such as high-pressure washers, wood chippers, and other wood chippers that we manufacture ourselves . The chipper is probably a new one, so I’d like to take a look at that one and do a review.This one

Is called the SY 75, which has maybe 7.5 horsepower. Well, it finally arrived.It arrived in a wooden box, so assembling it was easy, but I ‘ve actually already done it.There’s nothing inside, so I’ll just assemble it. It’s very easy to use, and it comes with instructions.You just

Need to put the legs, the tires, and the stays, and then add the soy milk, and that’s it.It’s really easy. I’d like to take a look at it. Yes, I just took it out of the car. I took it out of the car by myself.

It’s extremely light, so it weighs 35 kg. This is 35 kg. That’s what it looks like.The engine is actually a 212cc engine.It’s extremely light, and people like me don’t really ride it on horse races.The wood chipper is that K. I probably don’t ride it unless it’s a truck or something ,

But this one is very small and lightweight, so it’s a little bit difficult. It’s the hammer part.The part that has teeth and rotates is horizontal, so the mechanism is such that the crushed material is ejected sideways, and it’s very lightweight and compact. Yes, it’s light.

I can lift it by myself at 35 kg. Yes, YouTubers often use it. There’s that yellow one that everyone uses. Me too. I was a little confused about that, but it’s about 80 kg in the same class. I think there was a splash, and

There’s another one.It’s about 180km in the large class, so I’ve actually seen one, but it’s quite difficult to move by yourself, so I had to take it out of the light truck. It’s pretty difficult to load it up again, but it’s 35 km away

, so you don’t have to take it out of the car, it’s very easy, and you can’t move it either. Just like the tires and the cat’s state, there’s also this at the entrance.It wasn’t listed on the product page

, but I think it’s new.It’s just the switch.It was sent separately, but there’s a hole in it so the switch can be attached properly. It also opened and was improved, so I think it’s probably an improved version.It’s an emergency stop switch.It’s dangerous without this, so in the

Event something gets stuck or something bounces around here, there’s an emergency stop switch.This is the emergency stop switch. It’s dangerous if you don’t have it, so this is already included as standard. If you buy it now, it comes as standard. Then you

Have to wire it yourself. If you do it like this, you will be able to use this button . Well, there are quite a few safety measures in place, so I don’t think there will be any problems with such things.Okay, I’d like to actually try using this, but there

‘s a tree that I felled last time. I have all the Nee-eda in there, so I don’t know how powerful it is if I hold it there once.I’d like to try it out and actually use it.Yes, this is it.It’s

A manufacturer called Gado-san.I’ve never heard of this. But if you look at Amazon, there are quite a lot of different products out there, so if you don’t mind, just take a look at this manufacturer’s page and you’ll see a lot of interesting products, so please take a look . Yes,

That’s okay, I just brought it here. Last time I cut down a lot of trees, I brought them to a place where I kept a lot of them. But it’s very lightweight, so it’s easy to carry around.It’s really easy to push, just like pushing a unicycle.You can just hold it

By the soybean milk opening here. It can be moved, so it’s very light and small, making it easy to handle.If the crushing ability is really high, I think this will probably be the only choice.Yes, I forgot to mention that one bit, but this one. The SY75

Has 7.5 horsepower, but the crushing system can be up to 75mm, so I don’t know how much the branch here is, but I think it will probably be able to handle the thin ones. I’d like to try adding some branches and other things to see how far

I can go.I won’t do everything today, but today is just a review. I’d like to actually show you how far you can go.The soybean milk opening looks something like this.It has a vinyl lid to prevent it from splashing out.There’s no way to go

Beyond that. It has a blade that is directly driven by the engine, so it’s not belt-driven or something like that.It has a blade that comes directly from the engine ‘s crankshaft, and it has two blades, so it’s directly connected to the engine. Because it

Has a lot of power, it works well.With the belt type, the belt will break or smoke will come out, which is what happens when it gets clogged. There is no, so the driving force is directly connected to the engine, so if a load is applied, the engine will probably stop, but there is

No need for that slightly troublesome maintenance, so I think it is very easy to use . Right now, I’ve put all the engine oil and gasoline in it, so I’m going to give it a little run on the engine right away.Just to be safe, I’ve put in a chip, so

I’m going to use it later. Hey, I’d like to put it in the bag. I’m not sure if it’ll fit. The mouth is low, so I don’t know if it’ll fit, but I wonder if it’ll be okay. I wonder how far it will fly. Let’s wait and see. Let’s put it

In here. I ‘m going to save up some money. How’s it going? It’s grinding smoothly. The tip looks like this. When I grind it, it looks like this. It’s grinding while I’m sharpening it. The tip is also like this. It will gather inside

, so if you adjust the angle of this nozzle, it will go in properly.You need to be a little careful, but you have to get it all the way in, otherwise it will roll around there, so as much as possible. Push it all the way in. But don’t

Put your hand too far. It’s dangerous if you put your hand in too far, so be careful of that area and push the cat with the next tree. Once you’ve finished putting it in, put in the next tree. If you give it to it

, it will go in. The engine stopped for a moment, but since I let go of my hand, the cat probably got angry inside and got tangled. But the engine just stopped, so I’ll do it again soon. Well, we can start again. Well, I ‘d like to try it for a while.

Ah , yes, now I’ve tried a few shots. To make it easier to understand, let’s move the bag a little further and let it spray on the ground. Anyway, the chips look like this. Yes,

This is alive. I just cut it a while ago, so it’s still soft. It’s crushed like this. The rest, if it’s a little dry wood, it will turn into fine pieces like this. but Well, it’s a matter of preference, but personally, I like fairly large wood chips, so I

‘m wondering if this is just right.Yes, but it’s nice and neat.The round ones also have a round shape like this. It feels like it’s being sliced.The blade is rotating sideways like this, so even if you stick a piece of wood in there, it’ll

Just cut straight into it.It comes out with a rounded shape like this. I think it depends on the type of tree, but it can look like this.Yes, it’s very beautiful, so what I thought about when I was using it now

Is to put a tree inside the engraving. It’s better not to put too much hair in beforehand than with this vinyl.It’s dangerous, so this is the card for that purpose, but there will be some wood left inside the vinyl, so if you want to add more hair. If you don’t do that,

It will remain there for a long time, so you have to push it all the way to the end, but if you prepare one male like this, you can put it in like this

. If you press it after that, it’s okay even if you cut it separately, so you can enter Esono and start cutting all the way to the end. Well, I just brought a sample, and I just wanted to

See if I could make this and see if it would turn out nice and beautiful.I just measured it and brought it in. It’s about 75mm. This is for optical use, so it’s a little stiff, but it’s about 75mm

, so this is the maximum system that can be used, so I’m not sure if I can do it, so I’d like to try it out . Yes, I just inserted 75mm, but

If I don’t devise a way to insert it when slicing, it will stop a little bit like this when the teeth go in. However, it’s directly connected to that engine, so I’ll have to try the engine again. If you put it on, it will come back to life right away, so

I’m going to give it a try. How about tomorrow? I’ve finished everything now. 75mm is a bit tiring. There’s nothing I can’t do, though. If you don’t think about how to insert it, the engine will stop.It’s a direct connection type, so if a negative force is applied directly, the engine

Will stop, but it’s safer.It’s better than not stopping when you put it in. If you don’t push it little by little, and if you don’t push it in the right way, it will bounce back.That’s how it is with a wood chipper, so

It’s not limited to this manufacturer, but if you tweak the way you push it a little, it will work fine. It goes in like this and comes out like this, but it’s close to the 75mm limit, so you have to be careful, it’s dangerous, so I think it’s better

To choose a narrower one and put it in. I think what I just crushed looks like this. Yes, it’s a very beautiful wood chip. It’s amazing. You can make things

Like this with these leftover branches, and you can reuse it, and you can also use it in the field, for example. It can be used for fertilizer and other things, so if you spread it in muddy places like this, or in mountains, it will give you a really nice feeling without any chips,

So I’ll talk more about this later. I’m going to crush it at some point and make a video about it again at that time, so I’ll collect a lot of it in a bag and stock it up.I wo n’t use it right now, but I’ll take it all in once it’s clean.

I think I’ll stock up on some so that I can put chips in the places I want to lay them out.I have a lot of them here, so of course I can’t turn thick trees into chips, but there are things like thin branches and things like this. Don’t put it on.You

Can make chips for other things like this, so we’ll sort them out a little later.If you separate them from thick trees and thin branches, you’ll have enough to make chips.There’s plenty over there too. There’s a pile of them, so what do you

Think? To be honest, I don’t think it’s possible. It’s 7.5 horsepower and 75 mm maximum, but it’s got plenty of power and weighs 35 kg. This is the biggest one.I think the biggest thing is that it can be carried around.As I said earlier,

Other manufacturers also have that yellow one made by YouTubers. Hey, I was looking at that one too, and it’s a 7.5 horsepower class truck that weighs a little over 80kg.It’s quite difficult to get it off and on the light truck, so it’s probably a little dangerous for one person.However, it’s my turn. However,

You can carry this as it is and put it in by yourself.It only weighs 30 kg, which is about 1 bag of rice, plus the weight, it takes a little more money, so if you’re a man, you’ll be able to carry it

. It’s like this right now. This time , I used the wood chipper provided by Mr. Gad. It was a little loud, so I used earmuffs. If you’re like me, you might want to use earmuffs or something like a helmet face guard.

I think it’s better to use it.I use it when my ears are noisy, so I think it’s better to use it as much as possible.Also , I put it in while cutting branches. There’s also a pair of scissors, a small knife like this, a battery-operated one, an Artiza that I reviewed earlier,

And something like this chain saw, which makes it very easy to grind. I think it would work pretty well if you just give it a load, put it in, and then prepare for the next cut.I think Kazo -san also used a high-pressure washer and what else he

Used.Amazon If you look at it, you’ll see that they sell a variety of products.They’re made in-house, so they’re all made in China, but they’re made in Japan, and you can’t find anything like this.In this price range, it’s around 89,000 yen, or less than 100,000 yen. I don’t know if a crusher like this

Is made in Japan at that price, but I think most of them will be made in China, so Nekono Gado manufactures it in-house. I’m a company called Inchina , but they sell a lot of different products, so it’s pretty interesting. If you

Take a look at their Amazon page, you’ll find some interesting products . I want a powerful high-pressure washing machine.I’m going to give it a try.This time, I tried it as a review of a wood chipper.I’ll see you

Next time.If I have a chance to use that chip, I’d like to crush it all at once and clean it up. So, I’d like to take some videos like that when I have some free time, so please keep watching. Thank you very much .

提供：GAIDOH

ようやく期待していた、軽量ウッドチッパーが販売されました。
今までは重くて、大きくて、取り扱いが難しいウッドチッパーですが、GAIDOHから小型軽量なエンジン式が販売です。
自宅、山作業、庭整理にはもってこいですね。
音量はさすがに粉砕機だけあって大きいですので、作業場所の注意は必要かもしれません。
配達は自宅に宅配便で到着しますので、営業所に取りに行く面倒がありません。

今回紹介した商品はこちら⤵️

ウッドチッパー Gaidoh エンジン粉砕機 75mm粉砕能力 7.5馬力 粉砕機エンジン式 小型ガーデンシュレッダー 4サイクルOHV 半自動粉砕機 ゴミ処理 農家 造園業 果樹園業 家庭等々用 SY-75「宅配便」

https://amzn.to/49vbNxy

Amazonのアソシエイトとして、Hero’s Mountain は適格販売により収入を得ています。

お仕事のご依頼はこちらから⬇️
heros_mountain@ymail.ne.jp

BGM：魔王魂様

#山開拓 #GAIDOH #ウッドチッパー #SY75